How To Scan To A Computer; Scanning A Document; Scanning Using The Scan Key; Scanning Using A Scanner Driver - Brother DCP-J125 User Manual

11

How to scan to a computer

Scanning a document

There are several ways to scan documents.
You can use the SCAN key on the machine or
the scanner drivers on your computer.
a
To use the machine as a scanner, install
a scanner driver.
If the machine is on a Network,
configure it with a TCP/IP address.
(MFC-J265W and MFC-J415W only)
Install the scanner drivers on the

Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User's Guide.)
 (MFC-J265W and MFC-J415W only)
Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User's
Guide.)
b
Load your document. (See How to load
documents on page 20.)
 Use the ADF to scan multiple pages
of documents. It feeds each sheet
automatically. (MFC-J410 and
MFC-J415W only)
 Use the scanner glass to scan a
page of a book or one sheet at a
time.
c
Do one of the following:
 To scan using the SCAN key, go to

Scanning using the scan key.

 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
50
Downloaded from ManualsPrinter.com Manuals
Scanning using the
11
scan key
For more information, see Using the Scan
key in the Software User's Guide.
a
Press the SCAN key.
b
Choose the scan mode you want.

Scan to File

Scan to Media

Scan to E-mail

Scan to OCR

Scan to Image
1
MFC-J410 and MFC-J415W only
(Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) on page 3 for
further instructions.
c
(MFC-J265W and MFC-J415W only)
Choose the computer you want to send
the data to.
d
Press Start to begin scanning.
Scanning using a
scanner driver
For more information, see Scanning a
document using the TWAIN driver or
Scanning a document using the WIA driver in
the Software User's Guide.
a
Start a scanning application and click
the Scan button.
b
Adjust the settings such as Resolution,
Brightness and Scan Type in the
Scanner Setup dialog box.
c
Click Start or Scan to begin scanning.
11
11
1
11