Chapter 9
i
Do one of the following:
To change the file name, go to
step j.
Press Mono Start or Colour Start to
start scanning without changing
additional settings.
j
The file name is set automatically;
however, you can enter a name of your
choice using the dial pad.
Press a or b to choose File Name.
Press OK.
Enter the new name. (See Entering Text
on page 91.)
You can only change the first
6 characters.
Press OK.
Note
Press Clear to delete the current name.
k
Press Mono Start or Colour Start.
48
Downloaded from ManualsPrinter.com Manuals