Brother DCP-J125 User Manual page 145

d
You can add numbers to the broadcast
in the following ways:
 Press a or b to choose Add Number
and press OK. Enter a number using
dial pad.
Press OK.
 Press a or b to choose Speed Dial
and OK. Press a or b to choose
Alphabetical Order or
Numerical Order and OK.
Press a or b to select a number and
OK.
e
After you have entered all the fax
numbers by repeating step d, press
a or b to choose Complete.
Press OK.
f
Press Mono Start.
Note
• If you did not use up any of the numbers
for Groups, you can "broadcast" faxes to
as many as 90 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
• If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Downloaded from ManualsPrinter.com Manuals
Cancelling a Broadcast in progress
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialled and the Broadcast job number.
d
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes i Press 1
No i Press 2
e
Press 1 to cancel the fax number being
dialled.
The LCD will then show the Broadcast
job number.
f
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes i Press 1
No i Press 2
g
To cancel the Broadcast, press 1.
h
Press Stop/Exit.
Sending a fax
3
3
9