The default setting of all products is 575V-60Hz.
You can change it to other voltage class Inverter(500V-50Hz or 690V-50Hz) by changing the "" parameter.
Title
Function
Factory default setting
Please refer to Chapter 11 Table of parameters for the changed parameters by the setting.
[ Instance setting : Set to 690V-50Hz ]
Key operated
LED display
MODE
ENT
ENT
:
-
: 500V-50Hz default setting
: 575V-60Hz default setting
: 690V-50Hz default setting
Displays the operation frequency. (Perform during operation stopped.)
(When standard monitor display selection =[Output
frequency])
Displays the first basic parameter "History function ()."
Press either the
Press the ENTER key to display the parameter setting (Default
setting:).
Press the
The parameter value is written. After set it, "" is displayed
for a while and the display disappears momentarily, it becomes
"" displays.
A-3
Adjustment range
Operation
or
key to select "."
key to change the parameter to.
E6581528
Default setting
1