Adjustment level
(a)
(b)
(c)
(d)
Note: The 100% value of input/output power is the product of
[Example: Procedure of calibrating the meter connected to the terminal AM to which "output current" is assigned.]
Key operated
MODE
ENT
5
ENT
ENT
ENT
ENT
ENT
MODE
Fixed output 1
( ) =
185%
150%
250%
LED display
Displays the operation frequency. (Perform during operation stopped.)
–
(When standard monitor display selection = [Output frequency])
The first basic parameter "History function ( )" is displayed.
Press either the
Pressing the ENTER key allows the reading of parameter setting.
Set the parameter at (fixed output for meter calibration 2) by pressing
the
⇔
Press the ENTER key to save the change. Then, and the set
value are displayed alternately.
Select the AM terminal meter adjustment by pressing the
Press the ENTER key to switch to the data display mode.
Press either the
Adjust the pointer to the graduation to which you want it to point when the
inverter passes a current 100% larger than its rated output current.
(The meter reading will change at this time but be careful because there
will be no change in the inverter's indication).
Press the ENTER key to save the change. Then and the set value are
⇔
displayed alternately.
Select the "AM terminal meter adjustment " by pressing the
key.
Pressing the ENTER key allows the reading of parameter setting.
Return the parameter setting to (output current display).
Press the ENTER key to save the change. Then, and the set
⇔
value are displayed alternately.
Press the MODE key three times to return to the running frequency
display mode. (When standard monitor display selection =
[Output frequency])
Meter adjustment
Fixed output 2
( ) =
54%
100%
81%
135%
3 × 500/575/690V × inverter's rated current.
or
key to select " . "
key.
key or the
By setup, before the needle of meter beings to sway, it will take time.
E-30
Fixed output 3
( ) =
40%
74%
60%
100%
Operation
key to adjust the meter.
[Hint]
It's easier to make the
adjustment if you push and
hold for several seconds.
E6581528
key.