Managing The System; Managing Files On The Metro Ethernet Routing Switch 8600; Copying Files - Nortel NN46225-300 Fundamentals

Managing the system

This chapter describes how to manage the switch system using the Device
Manager software.
Navigation
•
•
•
•
•
Managing files on the Metro Ethernet Routing Switch 8600
On the Metro Ethernet Routing Switch 8600, the File System tabs allow
you to perform the following tasks:
•
•
•
These tasks are described in the subsections that follow.
Navigation
•
•
•
•
Copying files
Use this procedure to copy a file.
Copyright © 2005-2007, Nortel Networks
.
"Managing files on the Metro Ethernet Routing Switch 8600" (page 57)
"Managing files on the Metro ESU 1800" (page 61)
"Managing files on the Metro ESU 1850" (page 64)
"Viewing controlled software upgrade status" (page 70)
"Viewing trap logs" (page 71)
Copy a file.
Check the amount of memory used and the number of files stored in
onboard flash memory and an installed PCMCIA card.
Verify the name, size, and storage date of each file present in onboard
flash memory and PCMCIA memory.
"Copying files" (page 57)
"Checking flash memory use" (page 59)
"Viewing file names on the Flash" (page 59)
"Viewing file names on the PCMCIA" (page 60)
Nortel Metro Ethernet Routing Switch 8600
Fundamentals — Using Device Manager
NN46225-300 02.02 Standard
4.2 1 October 2007
57