Nortel 8672ATMM Installation Manual page 26

26 MDA overview
Figure 3
DS-3 MDA: 8672ATME and 8672ATMM modules
Each MDA has ports for connection to an ATM network. OC-3c/STM-1 and
OC-12c/STM-4 MDAs support concatenated transmission.
The flexibility of connectivity is achieved by mixing different types of MDAs.
The following table shows the available types of MDAs for the 8672ATME
and 8672ATMM modules.
Table 1
MDAs for the 8672ATME and 8672ATMM modules
Port type
OC-12c/STM-4
OC-3c/STM-1
DS-3
The OC-3c/STM-1 and OC-12c/STM-4 MDAs for the 8672ATME and
8672ATMM modules are Class 1 laser products as identified by the label
on the MDA. See the following figure.
Figure 4
Product label for the 8672ATME and the 8672ATMM module MDA —
OC-3c/STM-1 and OC-12c/STM-4
Installation — Media Dependent Adapters for the 8672ATME and 8672ATMM Modules
Copyright © 2008 Nortel Networks
.
Model
DS1304004
DS1304005
DS1304006
DS1304007
DS1304002
Nortel Ethernet Routing Switch 8600
NN46205-316 01.01 Standard
30 May 2008
Cable type
Multimode fiber
Single mode fiber
Multimode fiber
Single mode fiber
75 ohm coaxial
Connector type
Duplex SC
Duplex SC
MT-RJ
MT-RJ
BNC