Quick-Start Guide; Quick-Start Tasks - Nortel Versalar 5399 Quick Start Manual

This Quick-Start guide describes how to install and configure Remote Access
Concentrator (RAC) hardware and software using factory defaults. After installing
the RAC, you can customize it for your specific requirements.
This guide is written for system administrators who install and maintain RACs
and have knowledge of networking and networking protocols. You can choose
either the quick-start procedure or the roadmap.
The information is presented as follows:
•
•
•

Quick-Start Tasks

The quick-start tasks are designed to provide the information necessary to install
and configure the RACs using factory defaults. Table 1 summarizes the quick-start
tasks.
300855-C Rev. 00
Quick-Start -- Provides summarized instructions for installing the software
images, tools, and the RAC.
Roadmap -- Lists tasks and related documentation for each task.
Related Documentation -- Lists all documents supporting Remote Access
Concentrators.

Quick-Start Guide

1