Nortel CallPilot 201i Hardware Installation page 148

Connecting peripheral devices to the 201i server
The following diagram shows cable connections, where the CD-ROM
drive is the first device:
201i cabling
Option 11C
201i
NTRH30AA
Note: Alternate SCSI device connection scenarios are supported, but
are not depicted in this guide. If you want to use a connection scenario
that is not described in this guide, ensure that you use appropriate
cabling for each SCSI device.
5 Connect the power cord for each device.
6 Power up the devices.
7 Continue with "What's next?" on page 152.
148
NTRH1407
Bracket
assembly
CD-ROM drive SCSI
cable NTRH3502
Peripheral cabling
Optional
NTRH9038
Tape drive
Tape drive SCSI cable
NTRH3502
NTRH9105
CD-ROM
drive
Standard 1.07
G101434
CallPilot