Stihl MSA 160 C Instruction Manual page 98

English
f) Keep cutting attachments sharp and
clean. Properly maintained cutting
attachments with sharp cutting
edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories,
tool bits etc. in accordance with
these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Recharge the batteries only in
chargers specified by the
manufacturer. A charger that is
suitable for one type of battery pack
may create a risk of fire when used
with another battery pack.
b) Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury and
fire.
96
c) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
objects that could make a
connection from one terminal to
another. Shorting the battery
terminals together may cause burns
or a fire.
d) Misuse may cause liquid to escape
from the battery. Avoid contact with
the liquid. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from
the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
Chain saw safety warnings
Keep all parts of the body away
–
from the saw chain when the chain
saw is operating, make sure the
saw chain is not contacting
anything. A moment of inattention
while operating chain saws may
cause entanglement of your
clothing or body with the saw chain.
Always hold the chain saw with your
–
right hand on the rear handle and
your left hand on the front handle.
Holding the chain saw with a
reversed hand configuration
increases the risk of personal injury
and should never be done.
Hold the power tool by insulated
–
gripping surfaces only, because the
saw chain may contact hidden
wiring. Saw chains contacting a
"live" wire may make exposed metal
parts of the power tool "live" and
could give the operator an electric
shock.
Wear safety glasses and hearing
–
protection. Further protective
equipment for head, hands, legs
and feet is recommended.
Adequate protective clothing will
reduce personal injury by fling
debris or accidental contact with the
saw chain.
Do not operate a chain saw in a
–
tree. Operation of a chian saw while
up in a tree may result in personal
injury.
MSA 160 C, MSA 200 C