Mounting The Bar And Chain (Quick Chain Tensioner) - Stihl MSA 160 C Instruction Manual

English
Mounting the Bar and Chain
(quick chain tensioner)
Removing the chain sprocket cover
Set hand guard to ƒ
N
Remove the battery from the
N
machine
1
3
Swing grip (1) into position (until it
N
engages)
Turn the wing nut (2) to the left until
N
it hangs loosely in the chain
sprocket cover (3)
Remove chain sprocket cover (3)
N
Mounting the tensioning gear
1
Remove and reverse tensioning
N
gear (1)
68
Remove screw (2)
N
2
Position tensioning gear (1) and
N
guide bar (3) relative to one another
Insert and tighten screw (2)
N
2
1
3
2
Releasing the chain brake
Pull hand guard towards the front
N
handle until it engages audibly and
the hand guard is in the position ‚
– chain brake is released
Fitting the saw chain
1
WARNING
Put on protective gloves – risk of injury
by the sharp cutters
MSA 160 C, MSA 200 C