Maintenance - Symbol LS 5700 Quick Reference Manual

Q u i c k
awakened from this mode or the rest mode by momentarily
depressing the push button on the top right corner. When you
press this button, the scanner emits two beeps. The volume and
tone settings remain unchanged.

Maintenance

Cleaning the exit window is the only maintenance required. A dirty
or scratched window may affect scanning activity.
• Remove any dirt particles with a damp cloth.
• Wipe the window with a tissue moistened with
ammonia/water.
LS 5700
To change or clean the exit window:
• Press window removal latch and rotate forward.
To Clean:
• Wipe clean the underside of the upper window.
• Wipe clean the top surface of the lower window.
• Re-install the window by snapping into place.
LS 5800
To change or clean the exit window:
R e f e r e n c e
7
Window Removal
Latch