Symbol LS 5700 Quick Reference Manual page 5

Q u i c k
• Green light on, red light on - The scanner is asleep. See
Rest/Sleep Mode, on
• Anything else - Including steady red light, blinking red light,
or blinking green light. The scanner is not operating nor-
mally. Contact the technical person in charge of scanning at
your location, or call the Symbol Support Center at the tele-
phone number on the backcover.
Controls
The LS 5700 has a push button near the top right corner. This push
button is to both adjust the volume and tone of the beeper, and to
wake the scanner from its rest or sleep mode.
When the scanner is operating, depress this button to adjust the
volume/tone. Hold down the button until the desired sound is
obtained. There are five distinct volume/tone combinations.
Each combination beeps two times before cycling to the next
sound.
If the scanner is in a rest or sleep mode, depressing this push
button briefly awakens the scanner.
Volume Control &
Wake Up Switch
Decode Indicator
R e f e r e n c e
page
Sleep Mode &
Error Mode Indicator
6.
Window Removal
3
Speaker
Latch