Relay - Samsung DMT300 Series Service Manual

Hide thumbs Also See for DMT300 Series:

Table of Contents

3. Disassembly and Reassembly

7. First, case sensor and inlet valve should be removed,

then you can remove flow meter.

3.2.12. Relay

1. Unscrew the two (2) screws connecting the Frame R.

2. When you separate the Frame R, you can check the

Relay.

3-19

8. Pull the flow meter out of it's hook.

And then separate both hose clamps.

3. Separate the terminal of Relay.

Unscrew the screws of relay using short-body

screwdriver.

CAUTION

If reassemble the terminal of Relay after check or

replacement, you must be careful. Don't confuse.

CAUTION

Reassembly is in the reverse order of the removal.

Table of Contents

Show Quick Links

Table of Contents