Cradlepoint IBR600 User Manual page 83

User Manual / IBR600/IBR650
Manual Firmware Upload: Upload the router firmware from an
attached computer. (Go to
the firmware.)
System Config Save/Restore
Download Settings: Click on "Dowload Settings" to save your current
settings to a file on a computer.
Restore Settings: Click on "Restore Settings" to restore your
previous settings from a file on a computer.
Firmware Management
Load new firmware and restore your previous settings from a file on
a computer without rebooting between steps.
MODEM FIRMWARE
Modems: Select desired modem.
Current Firmware Version: Shows the number of the
current firmware and the date it was updated.
Available Firmware Version: If there is a new firmware
version available, this will list the version number.
Click "Check Again" to have the router check the
newest firmware.
Automatic Firmware Check: Automatically check for
new firmware updates once daily.
Manual Firmware Upload: Upload the router firmware
from an attached computer.
DEVICE OPTIONS
Reboot Options
• Reboot the Device: Manually restart the
router.
• Factory Reset Router: Reset the router to its
original settings. Once reset your SSID and
admin password will match the sticker on
the bottom of the router.
• Device Console: Access router's command line
interface (CLI) console.
Scheduled Reboot
• Scheduled Reboot: Router will restart at
user-specified time.
• Enable Watchdog Reboot: Router will restart
when it determines an unrecoverable error
condition has occurred.
cradlepoint.com/firmware
©2015 Cradlepoint. All Rights Reserved.
to download
11/5/15
| +1.855.813.3385 | cradlepoint.com
83