Cradlepoint IBR600 User Manual page 56

User Manual / IBR600/IBR650
All Cradlepoint routers and some other routers use the same default IP address for the primary network:
192.168.0.1. If you attempt to set up WiFi as WAN and there is an "IP conflict," you need to change the IP
address. The router is attempting to use the same IP address for both WAN and LAN, which is impossible. Go to
Network Settings > WiFi / Local Networks. Select the network and click Edit. You can change the IP address
under IPv4 Settings. For example, you might change 192.168.0.1 to 192.168.1.1.
Saved Profiles
This is a list of WiFi networks that have already been configured as WAN sources. The router will attempt to
connect to any of these access points using the password you have configured. If more than one access point
is in range, then the router will connect with the highest priority network.
Network: The name (SSID, or Service Set Identifier) that is broadcast by the access point.
BSSID: The numeric ID of the network (Basic Service Set Identifier). This parameter is required when trying to
connect to a hidden network using WiFi as WAN. It is optional when connecting to a visible network. If it is
set in a profile, both the SSID and BSSID must match to connect to an access point. If the BSSID is not set in a
profile, then the router will connect to any access point that matches the given SSID.
Auth Mode: The type of encryption that is used by the network.
• None
• WEP Auto
• WEP Open
• WEP Shared
• WPA1 Personal
• WPA2 Personal
• WPA1 & WPA2 Personal
You have two options for adding network profiles:
• Automatic – Select a WiFi network in Site Survey and click Import
• Manual – Click on Add under Saved Profiles and input the required information.
Site Survey
This is a list of WiFi networks that the router
can currently find, along with information
about the network such as its mode and
channel. Click "Refresh" if a WiFi network you
want to connect to is not listed. You can sort
the list based on any of the fields by clicking
on the field name.
If you import a network from Site Survey,
most of the information about the network
will already be completed. You need to input
the password (if there is one) and then click
submit to save the WiFi as WAN profile.
Wireless Scan Settings
Scan Interval: How often WiFi as WAN scans
the environment for updates. (Default: 60
seconds. Range: 5–3600 seconds.)
Scan While Connected: Continue to scan for
WiFi as WAN profile updates when connected.
©2015 Cradlepoint. All Rights Reserved.
11/5/15
| +1.855.813.3385 | cradlepoint.com
56