Cradlepoint IBR600 User Manual page 51

User Manual / IBR600/IBR650
• Type: The type is the source of the route. Select from: Main, Connected, Static, RIP, and OSPF.
• Metric: Numerical priority of the route.
• Route Map: Route maps provide a means to filter and/or apply actions to routes, allowing policies to be
applied to routes.
OSPF
OSPF (Open Shortest Path First) version 2 is a routing protocol described in RFC2328, OSPF Version 2. OSPF
is an IGP (Interior Gateway Protocol). Compared with RIP, OSPF can provide more scalable network support
and faster convergence times. OSPF is widely used in large networks such as ISP (Internet Service Provider)
backbone and enterprise networks.
OSPF Areas
• Area: Areas are identified by an ID.
• Default Cost: Set the cost of default-summary LSAs announced to stubby areas.
• Stub Area: Configure area to be stub area.
• No-Summary: Prevents ABR from injecting inter-area summaries into the specified stub area
OSPF Editor
• Router ID: This sets the router-ID of the OSPF
process. The router-ID may be an IP address of the
router, but need not be – it can be any arbitrary 32-
bit number. However it MUST be unique within the
entire OSPF domain to the OSPF speaker.
• Authentication Key: Set OSPF authentication key
to a simple password. After setting authentication
key, all OSPF packets are authenticated. The
authentication key has a maximum length of eight
characters.
• Enabled: Click to enable/disable the policy. (Default:
enabled.)
Network Areas: Areas are identified by an ID number.
Use the IP address and netmask fields to associate a
network with this policy.
Redistribute Routes: Redistribute routes of the
specified protocol or kind into BGP, with the metric type
and metric set (if specified), filtering the routes using
the given route map (if specified). Redistributed routes
may also be filtered with distribute lists.
• Type: The type is the source of the route. Select from: Main, Connected, Static, RIP, OSPF.
• Metric: Numerical priority of the route.
• Route Map: Route maps provide a means to filter and/or apply actions to routes, allowing policies to be
applied to routes.
©2015 Cradlepoint. All Rights Reserved.
11/5/15
| +1.855.813.3385 | cradlepoint.com
51