Desiccant Removal And Installation - Suzuki SX4 Service Manual

7B-24 Air Conditioning System: Manual Type
5) Move condenser assembly from the vehicle in the
arrow direction in the order of 1, 2 and 3 as shown,
and it can be removed.
"1"
"2"
"3"
Installation
Reverse the removal procedure to install condenser
noting the following instructions.
• Replenish specified amount of compressor oil to
compressor suction side referring to "Replenishing
Compressor Oil" in "Operation Procedure for
Refrigerant Charge: Manual Type".
• Evacuate and charge the A/C system referring to
"Evacuation" and "Charge" in "Operation Procedure
for Refrigerant Charge: Manual Type".

Desiccant Removal and Installation

Removal
1) Remove condenser assembly referring to
"Condenser Assembly Removal and Installation:
Manual Type".
2) Remove circlip (4) using special tool.
Special tool
: 09900–06107
3) Remove the cap (1) from the receiver / dryer tank
(2).
4) Remove desiccant (3).
2
I5RW0A721021-02
S7RW0A7216006
3
1
4
I5RW0A721022-01
Installation
Reverse the removal procedure noting the following
instructions.
• Replenish specified amount of compressor oil to
compressor suction side referring to "Operation
Procedure for Refrigerant Charge: Manual Type".
• Do not remove desiccant from the plastic bag until just
before inserting it into the receiver.
• Apply compressor oil to O-ring (1).
• Be sure to install circlip (2) with its flat face (3)
directed to cap.
• Install condenser assembly referring to "Condenser
Assembly Removal and Installation: Manual Type".
• Evacuate and charge the A/C system referring to
"Evacuation" and "Charge" in "Operation Procedure
for Refrigerant Charge: Manual Type".
: Do not reuse
1
2
3
I5RW0A721052-01