Instructions For Wall Mounting Your Voicemail Manager 100 - AT&T VoiceMail Manager 100 User Manual

I F W
NSTRUCTIONS OR
To save desk space and facilitate ease of use, your VoiceMail Manager 100 can be
mounted on the wall. Use the template on the following page and two (2) one-inch-
long #6 screws.
1. Choose a location that is near a telephone jack and a power outlet.
2. Position the wall-mounting template where you want to mount the VoiceMail
Manager 100. Using a pencil, lightly mark on the wall the location of the
mounting holes.
3. Start the screw holes by lightly tapping a nail into your pencil marks.
Remove the nail and insert the screws into the nail holes and tighten the
screws until there is one-eighth of an inch (1/8") clearance between the wall
and the heads of the screws.
4. Mount the VoiceMail Manager 100 on the wall by aligning the holes in the
base of the VoiceMail Manager 100 with the screws on the wall. Slide the
unit down until it locks into place.
-M Y
ALL OUNTING OUR
VM100
21