Wearing Your Jabra Bt325S; Listening To Your Music From Your Stand-Alone Music Player; How To; Exchanging The Jabra Headphones - Jabra BT325s User Manual

4

Wearing your Jabra BT325s

Your Jabra BT325s is designed to be comfortably worn using the integrated clothing clip
or lanyard loop (lanyard not included) . The microphone is integrated on the top left side of
the device (when viewing the Jabra BT325s as shown in figure 3.A) . Please take this into
account when positioning the main device to ensure a clear pickup of your voice .
(See fig. 3.B)
5

Listening to your music from your stand-alone music player

The Jabra BT325s realizes its full potential when used in conjunction with a stand-alone
music player . This could be an MP3-player, a portable media center or any other external
music device, featuring a standard 3 . 5 mm stereo connector .
To use the Jabra BT325s with your music player, plug the 3 . 5 mm jack into the
headphone socket on your music player . You are now able to listen to your favorite
tunes whilst ensuring that you will never miss a call from your Bluetooth enabled mobile
phone .
Please note that all controls on the Jabra BT325s are dedicated for controlling your
mobile phone calls . Controlling your music, ex . start/stop, skip track forward/backward,
volume etc . , must be done from your music device .
The Jabra BT325s is compatible with most stand-alone music players.
6

How to....

Listen to music
Plug in the 3 . 5 mm fixed cord into your stand-alone music device . The Jabra BT325s does
not need to be turned on for listening to music .
You can also unplug the headphones and insert them directly into the music device as
regular headphones .
Answer a call
Tap the answer/end button on your Jabra BT325s to answer a call when phone is
ringing . Music will fade automatically when an incoming call comes in .
End a call
Tap the answer/end button to end an active call . Music will continue automatically after
the call .
6
Reject a call*
Press the answer/end button when the phone rings to reject an incoming call .
Depending on your phone settings, the person who called you will either be forwarded
to voice mail or hear the busy signal .
Make a call*
When you make a call from your mobile phone, music will fade and the call will (subject
to phone settings) automatically be transferred to the Jabra BT325s when connected .
Activate voice dialing*
Tap the answer end button and speak the name . For best results, please record the
voice-dialing tag when you are wearing the Jabra BT325s . Please consult your phone's
user manual for more info on using this feature .
Redial last number*
Press the answer end button .
Call waiting and placing a call on hold*
This lets you put a call on hold during conversation to answer an incoming call .
• Press the answer/end button once to put the active call on hold and answer the
incoming call
• Press the answer/end button to switch between the two calls
• Tap the answer/end button to end the active conversation
Adjust sound and volume
Press the volume up or down (+ or -) to adjust the volume . (See fig. 1)
*Phone dependent
7

Exchanging the Jabra headphones

In order to exchange your supplied Jabra headphones with your favourite set, simply
plug your headphone jack into the headphone socket on the Jabra BT325s .
If using another set of headphones than the supplied Jabra model, please note that
differences in impedance and sensitivity might limit or increase the maximum volume
output level . An impedance level of 6 Ohm is recommended for the best performance .
However, always use extra precaution when using another set of headphones than the
original Jabra model .
7