Table of Contents
Advertisement
Should you experience difficulties in the use of this player please refer to the following chart or call
1800 686 079 for Product Service and Support.
PROBLEM
The unit will not
play
Unit is ON but
there is low or
no volume
Noise or sound
distorted on AM
or FM broadcast
FM ST does not
appear in the
display
AM or FM no
sound
All necessary care is taken at the point of manufacture to ensure this unit will perform to
Jensen's high quality standards. However if this unit becomes faulty within the warranty
period please return it to the point of purchase with your proof of purchase for a
replacement.
Distributed in Australia by:
K2 Sales Pty Ltd
PO Box 21
Balaclava, Vic
Australia 3183
Telephone 1800 686 079
Email: accounts@k2sales.com.au
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
• The unit is disconnected from the AC
outlet
• The AC outlet has no power
• The volume Control has been turned
all the way down
Station not tuned properly for AM or
FM.
FM: The FM wire antenna is not fully
extended.
AM: The bar antenna is not positioned
correctly
You have tuned to a mono station or
the station is too weak
Unit not at TUNER mode.
Volume at minimum
REMEDY
• Connect to an outlet.
• Try the unit on another outlet
• Turn the Volume control to a higher
output
Retune the AM or FM broadcast
station.
FM: Fully extend and reposition the
AM: Reposition the unit until the best
Select another FM station or extend or
rotate the wire antenna for best
reception.
Slide function selector to select AM or
FM.
Increase Volume
SERVICE
8
FM wire antenna.
reception is obtained.
Printed in China
Advertisement
Table of Contents
