Dual Access (Black & White Only); Broadcasting (Black & White Only) - Brother MFC-9460CDN User Manual

Chapter 3
Dual access
(black & white only)
You can dial a number, and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD will show the new
job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If you get an Out of Memory message
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memory message while
scanning a subsequent page, you can
press Mono Start to send the pages
scanned so far, or press Stop/Exit to
cancel the operation.
14
Downloaded from ManualsPrinter.com Manuals
Broadcasting
(black & white only)
3
Broadcasting lets you send the same fax
message to more than one fax number. You
can include Groups, One Touch, Speed Dial
numbers and up to 50 manually dialled
numbers in the same broadcast.
You can broadcast to up to 366 different
numbers. This will depend on how many
groups, access codes or credit card numbers
you have stored, and on how many delayed
or stored faxes in memory.
Before you begin the broadcast
One Touch and Speed Dial numbers must be
stored in the machine's memory before they
can be used in a broadcast. (See
Storing One Touch Dial numbers and
Storing Speed Dial numbers in Chapter 7 of
the Basic User's Guide.)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored One Touch Dial and Speed Dial
numbers for easier dialling. (See Setting up
Groups for Broadcasting on page 35.)
3
3