NordicTrack NTC4015.1 User Manual page 18

Nordic track user's manual exercise cycle ntc4015.1
Table of Contents

Advertisement

Note: If the resistance of the pedals and/or the
pace setting does not change when a "chirp"
is heard:
• Make sure that the letters "iFIT" appear in
the display.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con-
sole may not detect the program signals.
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
4
Monitor your progress with the displays.
See step 4 on page 10.
5
Measure your heart rate as desired.
See step 5 on page 11.
6
Turn on the fan if desired.
See step 6 on page 11.
7
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 11.
HOW TO USE AN IFIT.COM PROGRAM
DIRECTLY FROM OUR WEB SITE
Our Web site at www.iFIT.com allows you to play
iFIT.com programs directly from the internet. To use
programs from our Web site, the exercise cycle must
be connected to your home computer. See HOW TO
CONNECT YOUR COMPUTER on page 16. In addi-
tion, you must have an internet connection and an
internet service provider. A list of specific system
requirements is found on our Web site.
Follow the steps below to use a program from our
Web site.
1
Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 10.
2
Select the iFIT.com mode.
See step 2 on page 17.
3
Go to your computer and start an internet
connection.
4
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
5
Follow the desired links on our Web site to
select a program.
Read and follow the on-line instructions for using
a program.
6
Follow the on-line instructions to start the
program.
When you start the program, an on-screen count-
down will begin.
7
Return to the exercise cycle and begin
pedaling.
When the on-screen countdown ends, the pro-
gram will begin. The program will function in
almost the same way as a preset program (see
step 3 on page 12). However, an electronic "chirp-
ing" sound will alert you when the resistance set-
ting and/or pace setting is about to change.
8
Monitor your progress with the displays.
See step 4 on page 10.
9
Measure your heart rate if desired.
See step 5 on page 11.
10
Turn on the fan if desired.
See step 6 on page 11.
11
When you are finished exercising, the con-
sole will automatically turn off.
See step 7 on page 11.
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl728 exercise bikeSl 728

Table of Contents