Modes,31; Demo Mode; Restoring The Factory Settings - Hotpoint OK 1037ELDP.20 X/HA S Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 27
Residual heat indicators
The appliance is fitted with a residual heat indicator. When
the oven is off, the "residual heat" light on the display comes
on to indicate high temperatures inside the oven cavity. The
indicator light switches off when the inside of the oven has
cooled down.

Demo mode

The oven can operate in the DEMO mode: all heating
elements are deactivated, and the controls remain operative.
To activate DEMO mode, press and release button
then buttons
and
simultaneously for 6 seconds, and
then press and release button
the TEMPERATURE display shows "dEon".
To deactivate DEMO mode, when the oven is off press and
hold button
and button
A buzzer sounds and the "dEoF" message disappears from
the display.

Restoring the factory settings

The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven, then
press and hold the button corresponding to the first manual
cooking mode (top left) and the
for 6 seconds. Once the restore procedure is complete, a
buzzer will sound. The first time the
oven will behave as if it is being switched on for the first time.
Standby
This product complies with the requirements of the latest
European Directive on the limitation of power consumption
in standby mode. If no buttons are pressed for 30 minutes
and the control panel/door lock has not been activated, the
appliance automatically reverts to standby mode. Standby
mode is indicated by the high luminosity "Clock button" light.
As soon as interaction with the machine resumes, system
operation is restored.
Modes
! To guarantee perfectly soft or crispy food, the oven
releases water contained within the food in the form of
steam. This means it is possible to achieve optimal cooking
results for all dishes.
! Every time the oven is switched on, it suggests the first
CREATION cooking mode.
! Never put objects directly on the bottom of the oven; this
will prevent the enamel coating from being damaged.
! Always place cookware on the rack(s) provided.
ExtraLarge Space
! Do not use position "D" for racks.
Starting the oven
1. Switch the control panel on by pressing the
The appliance buzzer sounds three times (ascending) and
. A buzzer sounds and
simultaneously for 3 seconds.
button simultaneously
button is pressed, the
button.
all buttons light up in sequence.
2. Press the button corresponding to the desired cooking
mode. The TEMPERATURE display shows:
- the temperature associated with the mode, if programming
manually;
- "Auto", if programming is automatic.
The TIME display shows:
- the current time, if programming manually;
- the duration, if programming is automatic.
3. Press the
button to begin cooking.
4. The oven will begin its preheating stage: the preheating
,
light flashes.
5. When the preheating process has finished, a buzzer sounds
and the preheating indicator light shows that this stage has
been completed: the food can then be placed in the oven.
6. During cooking it is always possible to:
- change the temperature by pressing the
followed by the
and
- set the duration of a cooking mode (see Cooking Modes);
- press the
button to stop cooking. In this case the
appliance stores the temperature modified previously in its
memory (manual modes only);
- switch off the oven by pressing the
7. In case of a blackout, if the oven was already operating,
an automatic system within the appliance will reactivate
the cooking mode from where it was interrupted as long
as the temperature did not drop below a certain level.
Programmed cooking modes which have not yet started
will not be restored and must be reprogrammed.
! There is no preheating stage for the BARBECUE mode.
CREATION cooking modes
! All cooking modes have a default cooking temperature
which may be adjusted manually to a value between 30°C
and 250°C as desired (300°C for GRILL mode). CREATION
cooking modes include all manual programmes.
The oven controls all essential aspects of each of these
cooking modes and makes it easier for you to create
the perfect dish, from the simplest recipe to the most
sophisticated culinary delights: the temperature, heat
source, humidity and fan assisted operation are all
controlled automatically.
This chapter was written with the help of our very own
culinary expert. We invite you to follow his advice so you can
benefit from his experience and perfect your cooking skills.
The recommended cooking modes, temperatures and
oven shelf heights reflect our expert's own experience in
the kitchen and will help you achieve the very best results.
The table below specifies whether it is best to pre-heat your
oven or not for each CREATION cooking mode. Observing
these suggestions will guarantee perfect results.
If you wish to place food in a preheated oven, wait for the
preheating stage to be completed (this will be signalled by
a series of beeps).
The temperature is set automatically, according to the
cooking mode selected; however, you may adjust it to suit
your recipe.
You can also set a cooking duration with an immediate or
delayed start.
button,
buttons (manual modes only);
button for 3 seconds.
GB
31

Advertisement

Table of Contents
loading

Table of Contents