Led Display - Siemens SCALANCE XB-200 Operating Instructions Manual

Description of the device

2.4 LED display

2.4 LED display
Fault LED "F"
The fault LED "F" indicates the incorrect functioning of the device.
LED color
-
Green
Red
Port LEDs "P"
The port LEDs indicate the status of the ports.
RJ-45 ports
Each RJ-45 port has 2 integrated LEDs.
The upper green LED shows the status of the link.
LED color
Green
-
The lower yellow LED shows the status of data reception.
LED color
Yellow
-
SC/ST ports
There is an LED for each SC/ST port.
LED color
Green
-
18
LED status Meaning
Off The device is a turned off.
Lit The device has not detected a problem.
Lit The device has detected a problem.
The connected power supply is too low.
Using the WBM and CLI, you can set when the device
signals an error and which errors should be signaled.
LED status Meaning
Lit link exists
Off No link exists
LED status Meaning
Flashing Receiving data at port
Off Not receiving data at port
LED status Meaning
Lit Link exists, data reception at port
Off No link exists
Operating Instructions, 09/2015, C79000-G8976-C359-03
SCALANCE XB-200