Siemens ADSL C-110 Quick Start Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Network Router
  5. ADSL C-110
  6. Quick start manual

Siemens ADSL C-110 Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

s

Quick Start Guide

SIEMENS ADSL C-110

ADSL Router

•
Do never open the housing!
•
Use only the power supply provided with this device.
•
Use only the cables provided with this device and do
not perform any modifications on them.
01-040610

Advertisement

Table of Contents
loading

Related Manuals for Siemens ADSL C-110

Summary of Contents for Siemens ADSL C-110

  • Page 1: Quick Start Guide

    Quick Start Guide SIEMENS ADSL C-110 ADSL Router • Do never open the housing! • Use only the power supply provided with this device. • Use only the cables provided with this device and do not perform any modifications on them.

  • Page 2: Before You Begin

    If you need further assistance installing these items, please contact your service provider. Stand-alone Y-Line Filter Line Filter System Requirements Before starting the installation of the SIEMENS ADSL C-110, make sure your computer is equipped with: • Internet Browser (Internet Explorer or Netscape Version 4 or higher) •...
  • Page 3 3. Plug the phone cord (or other device cord) into the filter. 2. 2. Y-Line Filters If your SIEMENS ADSL C-110 and another device will share the same phone jack, install a Y-Line Filter: 1. Unplug the device’s cord from the phone jack.
  • Page 4 1b. Plug the other end of the cable into the phone jack. 2a. Connect the Ethernet cable (light gray) to the LAN port of your SIEMENS ADSL C-110. 2b. Connect the other end of the Ethernet cable to the LAN port of your computer.
  • Page 5 1b. Plug the other end of the cable into the phone jack. 2a. Connect the USB cable to the USB port on your computer. 2b. Do NOT connect the USB cable to your SIEMENS ADSL C-110 yet! Proceed with step 2b - part 2.

  • Page 6: Install The Usb Driver

    To install the USB driver proceed as follows: 1. Turn on your computer. 2. Insert the Siemens installation CD-ROM in your CD-ROM drive. Click on setup.exe in the directory /USB driver on your Siemens installation CD-ROM. Note for Windwos XP users: During installaion the following screen will appear...
  • Page 7 3. After a while the following windwo will apppear. Connect the USB cable to your SIEMENS ADSL C-110. The driver will be installed automatically. Note for Windows 98 SE users: If prompted, you need to insert the Windows 98 SE CD-ROM in your CD-ROM drive to complete the installation...
  • Page 8 5. If the following window appears click on Finish. Note for Windows XP users: You have to repeat step 4 and 5. 6. After finishing the installation a new icon is displayed in the Taskbar. 7. Proceed with step 3. (Read first the introduction and continue then with the paragraph related to your operating system).
  • Page 9 Configure the PC (TCP/IP settings) Introduction In step 3, you will configure your computer to communicate with the SIEMENS ADSL C-110. To do this, you will need to configure your PC’s network settings to obtain an IP address auto- matically. Computers use IP addresses to communicate with each other across a network or the Internet.

  • Page 10: For Windows Nt

    Step 3b: Configure the PC (TCP/IP settings) for Windows NT4 1. Click on Start -> Settings -> Control Panel. Double-click on the Network icon. The Network screen will appear. 2. Select the Protocol tab and highlight the TCP/IP line. Click on Properties. 3.
  • Page 11 Choose a TCP/IP entry whose name contains Ethernet adapter. Do not choose a TCP/IP entry whose name is PPPoE, VPN or other. If there is no TCP/IP line listed, refer to the User Manual on your Siemens CD- ROM to install TCP/IP now.

  • Page 12: Configure The Pc (Tcp/Ip Settings) For Windows 2000

    Step 3c: Configure the PC (TCP/IP settings) for Windows 2000 1. Click on Start -> Settings -> Control Panel. Double-click on the Network and Dial-up Connections icon. The Network screen will appear. 2. Select the Local Area Connection icon for the applicable Ethernet adapter (usually it is the first Local Area Connection listed).

  • Page 13: Configure The Pc (Tcp/Ip Settings) For Windows Xp

    Step 3d: Configure the PC (TCP/IP settings) for Windows XP The following instructions assume you are running Windows XP’s default interface. If you are using the Classical interface (where the icons and menus look like previous Windows ver- sions), please follow the instructions for Windows 2000 (Step 3b). 1.
  • Page 14 Step 3e: Configure the PC (TCP/IP settings) for Mac OS 8.6 and OS 9.x 1. From the Apple Menu, point to Control Panels and then click TCP/IP. 2. From the Connect via pull-down menu select Ethernet built-in. From the Configure pull-down menu select Using DHCP Server.
  • Page 15 Step 3f: Configure the PC (TCP/IP settings) for Mac OS X 1. From the Apple Menu, select System Preferences... 2. Click on the Network icon in the Internet & Network area. 3. From the Show pull-down select Built-in Ethernet. On the TCP/IP tab, select Using DHCP from the Configure pull-down menu.
  • Page 16 2. Click on Save & Reboot and wait until the entry page is displayed again. 3. Your Internet connection is established now. To access the advanced configuration of the SIEMENS ADSL C-110 enter the pre-set address in the browser field: http://192.168.1.1/doc/index.htm...
  • Page 17 Modem State Information Once installation is complete on your PC, it is possible to access the SIEMENS ADSL C-110 state page, which displays the most important information on the configuration and state of the ADSL Bridge C-110. Accessing the modem state page The modem state page is accessed via a web browser as follows: - Launch web browser.

  • Page 18: Troubleshooting

    No LEDs come on when the modem is on 1. Check the connection between the power supply unit and the SIEMENS ADSL C-110. 2. Check that the mains socket and power supply unit are operating correctly.
  • Page 19 3. Make sure that the user name and password entered are correct. 4. Make a telephone call to ensure that there are no problems on the telephone line. The ADSL modem cannot be reached with the PING command 1. Check the connection used (Ethernet or USB) between your PC and the ADSL modem. 2.
  • Page 20 Glossary 1. Make sure that the connections to the ADSL modem are correct, that the port used (Ethernet or USB) is working correctly and that the modem is on. 2. Check that the IP address in the browser address bar is 192.168.1.1 10/10 0Base-T 10/100Base-T uses an unshielded UTP cable (category 5) for Fast Ethernet connections.
  • Page 21 Domain name system. This is not an actual internet protocol, but a system for translating node names (for example www.nasa.org) into numerical addresses (for example 192.168.2.1). Digital Subscriber Line. Network Technology that transmits using a broad bandwidth over short distances using traditional telephone copper pairs. There are four types of DSL: ADSL, HDSL, SDSL and VDSL.

  • Page 22: Spanning Tree

    PPPoE (RFC2516) PPP over Ethernet. Transmission protocol used for ADSL connections. In Italy, this is usually an alternative to PPPoA. In fact, data packets, whether in PPPoA or PPPoE, are transmitted on the ATM network. The correct term for this protocol is in fact Ethernet over ATM. Permanent Virtual Circuit.
  • Page 23 Step 6: Front panel system messages LED Indicators The ADSL Bridge modem is equipped with LEDs on the front as described in the table below (from left to right): Color Status Description green Unit is powered on Unit is powered off DSL LNK green Blinking...

Table of Contents