Assembly - NordicTrack ASR 630 831.23765.0 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver
wrench , and rubber mallet
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-
bled. If a part is not in the parts bag, check to see if it has been preassembled.
Wave Washer Large Wave
(80)–2 Washer (89)–2
M10 Split
Washer (99)–4
M8 x 19mm Patch
Screw (86)–6
M10 x 58mm Shoulder Bolt (104)–2
1. See HOW TO FOLD AND UNFOLD THE
ELLIPTICAL EXERCISER on page 12 and
unfold the elliptical exerciser.
While another person lifts the front of the
Frame (1), attach the Front Stabilizer (4) to the
Frame with two M10 x 80mm Button Screws
(93) and two M10 Split Washers (99).
M8 Split
Washer (97)–16
M8 Nylon
Screw (78)–4
Locknut (94)–2
M8 x 23mm Shoulder
Screw (105)–2
.
M8 Washer M8 x 23mm
(106)–2 Thin Washer
M4 x 16mm M4 x 16mm
Round Head
Screw (92)–19
M8 x 14mm Patch
Screw (84)–6
M10 x 80mm Button Screw (93)–4
1
5
, adjustable
M8 x 23mm
Washer (31)–10
(96)–2
M4 x 16mm
Blunt Screw
(33)–2
M8 x 45mm Button
Screw (90)–6
99
4
1
93