To Exercise; To Adjust The Stride - NordicTrack ASR 630 831.23765.0 User Manual

HOW TO EXERCISE ON THE ELLIPTICAL
EXERCISER
To mount the elliptical exerciser, hold the upper body
arms and step onto the pedal that is in the lowest posi-
tion. Next, step onto the other pedal. Push the pedals
until they begin to move with a continuous motion.
Note: The crank arms can turn in either direction.
It is recommended that you turn the crank arms in
the direction shown by the arrow below; however,
for variety you can turn the crank arms in the
opposite direction.
To dismount the elliptical exerciser, wait until the ped-
als come to a complete stop. Note: The elliptical
exerciser does not have a free wheel; the pedals
will continue to move until the flywheel stops.
When the pedals are stationary, step off the higher
pedal first. Then, step off the lower pedal.
Upper Body Arms
Pedals
Crank Arm
HOW TO ADJUST THE STRIDE OF THE ELLIPTICAL
EXERCISER
To adjust the stride of the elliptical exerciser, first pull
one of the adjustment knobs until the adjustment
bracket pivots freely. Pivot the adjustment bracket until
the adjustment knob is aligned with one of the three
holes in the crank arm, and gently release the knob.
Then, pivot the adjustment bracket back and forth
slightly to make sure that the adjustment pin is
engaged in one of the three holes in the crank arm.
Adjustment
Adjustment
Pin
Crank
Arm
Adjust the other side of the elliptical exerciser in the
same way.
13
Bracket
Adjustment
Knob
Holes