Assembly - NordicTrack ASR630 831.23765.1 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver
wrench , and rubber mallet
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
Wave Washer
(80)–2
M8 Nylon
Locknut (94)–2
M8 x 16mm Patch M8 x 20mm Button
Screw (84)–6
M8 x 40mm Button
Screw (90)–6
Large Wave
Washer (89)–2 Washer (97)–10
M10 Nylon #8 x 1/2"
Locknut (82)–2 Screw (81)–2
M8 x 20mm Patch
Screw (85)–4 Screw (86)–4
.
M8 Split M10 Split
Washer (99)–4
#8 x 1/2" Blunt
Screw (92)–9
M10 x 80mm Button Screw (93)–4
5
, adjustable
M8 x 23mm
Washer (31)–12
#8 x 3/4"
Screw (78)–14
M8 x 58mm Button
Bolt (104)–2