Repositioning The Joystick - Invacare nutron R51 Owner And Maintenance Manual

Repositioning the Joystick

NOTE: For this procedure, refer to FIGURE 11.2.
1. Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2. Remove the joystick from the wheelchair.
3. Remove the three hex screws that secure the halves of the mounting bracket to the arm
tube.
4. Reposition mounting bracket on opposite arm tube ensuring the threaded plate of the
mounting bracket is on the inside of the arm tube as shown in FIGURE 11.2.
5. Using the three hex mounting screws and washers, secure the halves of the mounting
bracket to the arm tube.
6. Slide the joystick mounting tube through the mounting bracket to the desired
position.
7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting
bracket.
Hex
Mounting
Screws
Adjustment
Lock Lever
Part No. 1106645
Washers
Mounting
Bracket
Joystick
Mounting
Tube
FIGURE 11.2 Repositioning the Joystick
53
SECTION 11—JOYSTICK
Mounting Bracket
(Threaded Plate)
Arm
Tube
NOTE: Joystick
not shown.
R51™and R51LXP