Repositioning The Joystick To Opposite Arm - Invacare At’m Service Manual

SECTION 7—JOYSTICK
Mounting
Mounting
Hole on Arm
Bracket
Joystick
DETAIL "A"
Tie-Wrap
Joystick
Quick-Release
Mounting Holes
Pins
on Bracket
Wheelchair
Basket
Frame
Upholstery
Flap
Joystick
Cable
Tie-Wrap under
Tie-Wrap
Hook-and-Loop Fastening Strap
STEP 4
(Hidden from View)
FIGURE 7.2 Removing/Installing the Joystick

Repositioning the Joystick to Opposite Arm

NOTE: For this procedure, refer to FIGURE 7.2.
1. Remove the joystick. Refer to Removing/Installing the Joystick on page 36.
2. Reposition the joystick and mounting bracket assembly on the opposite arm.
NOTE: Route the joystick cable under the basket upholstery to prevent it from interfering with
wheelchair motion.
3. Install the joystick. Refer to Removing/Installing the Joystick on page 36.
37
Part No. 1125078 At'm