System Utility - Planet VRT-402N User Manual

Configure [Administration Interface] Settings based on the instructions listed below.
Language
Administrator Password
Re-type Password
Remote Management
Management Port
Configure [Configuration] Settings based on the instructions listed below
Configuration Export
Default Configuration
Restore
Configuration Import
Configure [Firmware] Settings based on the instructions listed below
Firmware Upgrade
7.2

System Utility

Click on [Admin] – [System Utilities] tab. You will see the following screen.
Select the language of administration Interface you wish to use.
Maximum input is 36 alphanumeric characters (case sensitive)
* Please change the administrator's password if the remote
management is enabled. Otherwise, a malicious user can access
the management interface. This user can then have the ability to
change the settings and damage your network access.
Enter the password again to confirm.
Select Enable to enable Remote Management.
Select Disable to disable Remote Management
HTTP port which users can connect to. (default port is 8080)
Click Export to save your current configuration settings in a file.
Click Restore to recover the default system settings.
Click Browse and Import to load previous configuration settings.
Click Browse and Upgrade to upgrade the firmware.
56