Virtual Host - Planet VRT-402N User Manual

Add Port Range Forwarding Rule
Click on [Add] tab. You will see the following screen.
Configure [Add Port Range Forwarding Rule] Settings following the instructions below
Sequence Number
Rule Name
Action
External Interface
Protocol
External Port Range
Internal IP
Internal Port Range
6.2

Virtual Host

This defines the sequences (priorities) of the port forwarding rules. If a packet fits
the conditions setup by the port forwarding rules, the packet will then be forwarded
according to the 1st rule from the top of the list.
Enter the name of the port forwarding rule.
Check/Uncheck to enable/disable this port forwarding rule.
Choose WAN1 or WAN2 as the External port forwarding interface.
Choose TCP, UDP or TCP/UDP for the rule to be applied.
Set up the External Port Range for the rule to be applied.
Set up the Internal IP for the rule to be applied.
Set up the Internal Port Range for the rule to be applied.
51