Select L2TP if your ISP requires the L2TP protocol to connect to the Internet. Your ISP should provide all
the information required in this section.
In this Wifi-Wan1 (WISP) mode, the wireless client will connect to ISP access point. The NAT is enabled
and PCs in Ethernet ports share the same IP to ISP through wireless LAN. You must set the WAN port to
WISP mode first and connect to the ISP AP in Site-Survey page. The connection type can be setup in
WAN
page
by
using
PPPOE,
DHCP
client,
PPTP
client
or
static
IP.
18