Automatic Defrosting; Stand Time; Conversion Guide - GE JHP64G Use And Care Manual

Automatic Defrosting

With the Auto Defrost feature,
the oven automatically sets the
defrosting time and power levels
for you. You choose the appropriate
code number from 1 to 3 for the food
you are defrosting, then enter the
food weight in pounds and tenths
of a pound (see Conversion Guide
below) and touch START. The oven
calculates defrosting time and changes
power levels during defrosting to
give even defrosting results.
How to set Auto Defrost
Before you begin, check the
guide located at bottom of oven
when you open the door. It shows
minimum and maximum food
weights for each code number. You
will need to know your food weight
and corresponding code before
setting Auto Defrost.
1. Remove food from package,
place in oven on microwave-safe
dish, and close door.
2. Touch AUTO DEF pad.
"ENTER DEF CODE" flashes.
"AUTO" and "WEIGHT" appear
on display.
10
Note: If "ERROR" appears on display,
check the Code Guide. Make sure
weight corresponds to code number.
Twice during defrosting, the oven
beeps 3 times, "TURN" flashes
and oven shuts off. "TURN"
continues to flash until you open
the door. After turning the food,
close door and touch START.
When defrosting time is completed,
"End" flashes and oven beeps 3
times. "End" remains on di~play
and oven beeps every minute until
door is opened or CLEAR/OFF
pad is touched.

Stand Time

When using the Auto Defrost
feature, it is necessary to allow
food to stand in order to finish
defrosting the interior. You may
take the food out of the oven if you
wish. And in some cases, it should
stand in your refrigerator. Stand
time recommendations are given
in the guide on the next page.

Conversion Guide

If weight of food is stated in
pounds and ounces, the ounces
must be converted to tenths (.1)
Ounces Pounds
1-2 .1
3 .2
4-5 .3
6-7 .4
8 .5
9-1o
.6
11 .7
12-13
14-15 .9