Sony SLV-EZ717AS Operating Instructions Manual page 7

Notes
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• You may not be able to use some buttons to control non-Sony TVs due to the remote
commander's signal limitations.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries of the remote commander, the code number may
automatically reset to 01 (Sony). If your TV is not a Sony, it is recommended to
manually set the appropriate code number every time you replace the batteries.
• If you set your TV's code number correctly while the TV is turned on, the TV turns
off automatically.
01GB03GET-AS/NZ.p65 7
Getting Started
10/1/01, 11:22
SLV-EZ717_GB 3-065-578-11 (2)
7