Sony SLV-EZ717AS Operating Instructions Manual page 6

Step 2: Setting up the remote commander (continued)
Notes
• The TV/VIDEO button selects the TV's input source (either aerial in or line in). The
button does not control this VCR.
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
Controlling other TVs with the remote commander
(SLV-EZ717AS/NZ only)
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the table below, set the appropriate manufacturer's code
number.
1
Set
2
Hold down ?/1, and enter your TV's code number(s) using the
programme number buttons. Then release ?/1.
Now you can use the ?/1, VOL +/–, PROG +/–, programme number
buttons, ? (ten's digit) and TV/VIDEO buttons to control your TV. You
can also use the buttons marked with a dot (•) to control a Sony TV. To
control the VCR, reset
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
Manufacturer
Sony
Akai
Blaupunkt
Ferguson
Grundig
Hitachi
ITT/Nokia
JVC
Loewe
Mivar
NEC
Panasonic
6
Getting Started
01GB03GET-AS/NZ.p65
TV/VIDEO at the top of the remote commander to
TV/VIDEO
Code number
1
01* ,02
68
10
52
1
11*
24
3
15,16,69*
33*
45
09, 70
66
1
17* ,49
6
VIDEO
to .
Manufacturer
Philips
Saba
Samsung
Sanyo
Sharp
Telefunken
Thomson
Toshiba
10/1/01, 11:22
SLV-EZ717_GB 3-065-578-11 (2)
TV .
Code number
1 1 1
06* ,07* ,08*
12,13
22,23
25
29
36
2
43*
38