Sony SLV-EZ717AS Operating Instructions Manual page 20

Presetting channels (continued)
5
PROG
6
PLAY
OK
7
8
PLAY
OK
20
Getting Started
01GB03GET-AS/NZ.p65
Press PROG +/– to select the programme
position.
Press , repeatedly until the channel you
want is displayed. Pressing < goes back
to the previous channels.
The channels are scanned in the following
order:
SLV-EZ717AS, and
Channel coverage
SLV-EZ414AZ/EZ212AZ
(COUNTRY is set to
AUS)
VHF AS0 to AS12, AS5A, AS9A
UHF AS28 to AS69
CATV S1 to S41, S01 to S05
(TV distribution)
If you know the number of the channel you want, press the
programme number buttons. For example, for channel 5, first press
"0" and then press "5". To set channel 5A or 9A, press , after
pressing "0" and "5" or "0" and "9" (SLV-EZ717AS and
SLV-EZ414AZ/EZ212AZ – when COUNTRY is set to AUS).
To allocate another channel to another programme position, repeat
steps 5 and 6.
Press OK.
20
Selected programme
position
TUNER PRESET
NORMAL / CATV
AUTO PRESET
CHANNEL SET
ADD / ERASE
AFT
FINE TUNING
SELECT : [ ]
SET : [ ]
TUNER PRESET
NORMAL / CATV
AUTO PRESET
CHANNEL SET
ADD / ERASE
AFT
FINE TUNING
SELECT : [ ]
SET : [ ]
SLV-EZ717NZ and
SLV-EZ414AZ/EZ212AZ
(COUNTRY is set to NZ)
NZ1 to NZ11
E21 to E69
S1 to S41, S01 to S05
10/1/01, 11:22
SLV-EZ717_GB 3-065-578-11 (2)
PROG14
• NORM CATV
21
• ADD ERASE
• ON OFF
PROG14
• NORM CATV
35
• ADD ERASE
• ON OFF