Sony SLV-EZ717AS Operating Instructions Manual page 45

To record from a source connected to the LINE-1 IN or LINE-2 IN
(SLV-EZ717AS/NZ only) jacks, press INPUT SELECT or PROG +/–
to display "L1" or "L2" (SLV-EZ717AS/NZ only) in the "PROG"
position.
3
Press , to confirm the setting.
PLAY
The cursor (B) appears at the beginning of the line. To enter another
OK
setting, move the cursor to the next line and repeat step 2.
4
Press OK.
PLAY
OK
5
Press ?/1 to turn off the VCR.
• ]/1
The t indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
the current date t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday
to Saturday) t MON-FRI (Monday to Friday) t EVERY SAT..... t EVERY
MON t EVERY SUN t 1 month later t (dates count down) t the
current date
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the REC SPEED button.
• (For SLV-EZ717AS/NZ only)
To record NTSC signals, set the tape speed to SP or EP. To record in the EP mode,
set the tape speed to "LP".
Note
t
• The
inserted.
01GB04BAS-AS/NZ.p65
indicator flashes in the display window when you press ?/1 with no tape
45
Basic Operations
10/1/01, 11:24
SLV-EZ717_GB 3-065-578-11 (1)
45