Sony SLV-EZ717AS Operating Instructions Manual page 21

Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The
disabled positions will be skipped later when you press the PROG +/–
buttons. You can also disable unwanted programme positions using the SET
UP CH AND G-CODE menu (page 27).
1
Press MENU, then press M/m to move the cursor (B) to TUNER
PRESET and press OK.
2
Press PROG +/– to select the programme position you want to skip.
3
Press M/m/</, to move the cursor (B) to ADD/ERASE, then select
ERASE.
4
Press OK.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/– to select the programme number for which you cannot
obtain a clear picture.
2
Press MENU, then select TUNER PRESET and press OK.
3
Select FINE TUNING.
The fine tuning meter appears.
TUNER PRESET
NORMAL / CATV
AUTO PRESET
CHANNEL SET
ADD / ERASE
AFT
FINE TUNING
SET
4
Press </, to get a clearer picture, then press OK.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Notes
• The menu disappears automatically if you do not proceed for more than a few
minutes.
• The channel numbers in the CHANNEL SET column may not be the same as those
in your area. This is because this VCR's channel search system is based on the fixed
TV system that has the widest channel coverage. If necessary, apply your local
channel numbers to the programme positions (see "Changing programme
positions" on page 25).
01GB03GET-AS/NZ.p65
Selected programme position
PROG14
• NORM CATV
35
• ADD ERASE
• ON OFF
: [ ]
21
Getting Started
10/1/01, 11:22
SLV-EZ717_GB 3-065-578-11 (2)
21