Active Data Connections; Synchronisation - Nokia N97 N97 User Manual

WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
Network status — Define whether the network name is
displayed.
WLAN network mode — Select
hoc network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an
ad hoc network, all devices must use the same WLAN
network name.
WLAN security mode — Select the encryption used:
WEP, 802.1x, or WPA/WPA2
not available for ad hoc networks). If you select
network, no encryption is used. The WEP, 802.1x and WPA
functions can be used only if the network supports them.
Homepage — Enter the web address of the starting page.
Use access point — Set the device to create a connection
using this access point automatically or after
confirmation.
The available options may vary.

Active data connections

Select Menu Settings
>
mgr..
In the active data connections view, you can see the open
data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
Ad-hoc to create an ad
(802.1x and WPA/WPA2 are
Open
and Connectivity Connection
>
Note: The actual invoice for calls and services from your
service provider may vary, depending on network
features, rounding off for billing, taxes, and so forth.
To end a connection, select
To end all open connections, select
all.
To view the details of a connection, select
Details.

Synchronisation

Select Menu Settings
>
transfer > Sync.
The Synchronisation application enables you to
synchronise your notes, calendar entries, text and
multimedia messages, browser bookmarks, or contacts
with various compatible applications on a compatible
computer or on the internet.
You may receive synchronisation settings in a special
message from your service provider.
A synchronisation profile contains the necessary settings
for synchronisation.
When you open the application, the default or previously
used synchronisation profile is displayed. To modify the
profile, tap a synchronisation item to include it in the
profile or to leave it out.
To manage synchronisation profiles, select
Options > Disconnect.
Options Disconnect
>
Options
and Connectivity Data
>
Options
>
67