Table of Contents
Advertisement
Saving the captured image may take longer if you change
the zoom, lighting, or colour settings.
Capture images
When capturing an image, note the following:
Use both hands to keep the camera still.
•
The quality of a digitally zoomed image is lower than
•
that of a non-zoomed image.
The camera goes into battery saving mode if there are
•
no actions for about a minute. To continue capturing
images, select Continue.
Keep a safe distance when using the flash. Do not use
•
the flash on people or animals at close range. Do not
cover the flash while taking a picture.
To capture an image with the main camera, do the
following:
1
To switch from video mode to image mode, if
necessary, select
2
To capture an image, press the capture key. Do not
move the device before the image is saved and the
final image displayed.
Capture images with secondary camera
To capture an image, select
before the image is saved and the final image displayed.
To zoom in or out when capturing an image, use the zoom
slider.
.
>
. Do not move the device
To leave the camera open in the background and use other
applications, press the menu key. To return to the camera,
press and hold the capture key.
On-screen controls and indicators for still image
capture
The still image viewfinder displays the following:
1
Capture mode indicator
2
Zoom slider. To turn the zoom slider on and off, tap
the screen.
3
Capture icon. Tap to capture an image.
4
Flash mode. Tap to change settings.
5
Capture settings. Tap to change settings.
6
Battery charge level indicator
7
Image resolution indicator
8
Image counter (the estimated number of images you
can capture using the current image quality setting
and available memory)
9
Memory in use. Depending on the setup of your device,
there are the following options: device memory ( ).
10 GPS signal indicator
93
Advertisement
Table of Contents
