Active Data Connections - Nokia E5-00 User Manual

To have an indicator displayed when there is a wireless LAN (WLAN) available in
your current location, select
To select the interval for your device to scan for available WLANs, and to update the
indicator, select
Show WLAN availability
To set the device to test the internet capability of the selected WLAN automatically,
to ask for permission every time, or to never perform the connectivity test, select
Internet connectivity test
If you select Run automatically
asks for it, and the connectivity test is performed successfully, the access point is
saved to internet destinations.
To check the unique media access control (MAC) address that identifies your device,
enter *#62209526# in the home screen. The MAC address is displayed.

Active data connections

Select Menu Ctrl. panel
>
Select Active data
In the active data connections view, you can see the open data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
Note: The actual invoice for calls and services from your service provider may
vary, depending on network features, rounding off for billing, taxes, and so forth.
To end a connection, select
Show WLAN availability
Scan for networks. This setting is not available unless you select
> Yes.
Run
>
or allow the test to be performed when the device
Connectivity
>
connections.
Options
automatically, Ask every
Conn.
>
> Disconnect.
Connectivity
> Yes.
time, or
mgr..
79
Never run.