Nokia N97 N97 User Manual page 66

Packet data access points
Select Menu Settings
>
Destinations Access
>
on the screen.
To edit a packet data access point, open one of the access
point groups, and select an access point marked with
.
Follow the instructions from your service provider.
Select from the following:
Access point name — You obtain the access point name
from your service provider.
User name — The user name may be needed to make a
data connection, and is usually provided by your service
provider.
Prompt password — If you must enter the password
every time you log in to a server, or if you do not want to
save your password in the device, select Yes.
Password — A password may be needed to make a data
connection and is usually provided by your service
provider.
Authentication — Select
password encrypted or
encrypted when possible.
Homepage — Depending on the access point you are
setting up, enter the web address or the address of the
multimedia message centre.
Use access point — Select
want the device to ask for confirmation before the
66
connection using this access point is created, or
and Connectivity
>
point, and follow the instructions
Secure to always send your
Normal to send your password
After confirmation
Automatically
destination using this access point automatically.
Select Options
following:
Network type — Select the internet protocol type to
transfer data to and from your device. The other settings
depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address
of your device.
DNS addresses — Enter the IP addresses of the primary
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy
server.
Proxy port number — Enter the port number of the proxy
server.
WLAN internet access points
Select Menu
Destinations
To edit a wireless LAN (WLAN) access point, open one of
the access point groups, and select an access point marked
with .
Follow the instructions from your WLAN service provider.
Select from the following:
if you
WLAN network name — Select
Search for networks. If you select an existing network,
if you want the device to connect to the
Advanced settings
>
Settings and Connectivity
>
Access point, and follow the instructions.
>
Enter manually
and from the
>
or