Advanced Wlan Settings; Active Data Connections - Nokia 5800 XpressMusic User Manual

● WEP key settings — Enter WEP encryption (length of the key), WEP key
format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected
format).
Security settings for 802.1x and WPA/WPA2
● WPA/WPA2 — Select the means of authentication: EAP to use an extensible
authentication protocol (EAP) plug-in, or Pre-shared key to use a password.
Complete the appropriate settings:
● EAP plug-in settings — Enter the settings according to the instructions from
your service provider.
● Pre-shared key — Enter a password. The same password must be entered
on the WLAN access point device.
● WPA2 only mode — Only WPA2 enabled devices are allowed to establish a
connection in this mode.

Advanced WLAN settings

Select Options > Advanced settings and from the following:
● IPv4 settings — Enter the IP address of your device, the subnet IP address, the
default gateway, and the IP addresses of the primary and secondary DNS servers.
Contact your internet service provider for these addresses.
● IPv6 settings — Define the type of DNS address.
● Ad-hoc channel (only for Ad-hoc) — To enter a channel number (1-11)
manually, select User defined.
● Proxy server address — Enter the address for the proxy server.
● Proxy port number — Enter the proxy port number.

Active data connections

Select Menu > Settings and Connectivity > Connection mgr..
In the active data connections view, you can see the open data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
© 2008 Nokia. All rights reserved. 103