Nokia N97 N97 User Manual page 127

company information management department. These
configuration settings may include connection and other
settings used by different applications in your device.
To connect to the server and receive configuration settings
for your device, select Options
profile, and Options Start
>
To create a server profile, select
profiles Options New server
> >
To delete a server profile, select the profile and
Options > Delete.
To check for software updates, select
updates.
Warning:
If you install a software update, you cannot use the device,
even to make emergency calls, until the installation is
completed and the device is restarted. Be sure to back up
data before accepting installation of an update.
Downloading software updates may involve the
transmission of large amounts of data (network service).
Make sure that the device battery has enough power, or
connect the charger before starting the update.
Security settings
Phone and SIM
Select Menu Settings
>
Security settings Phone and SIM
>
Server profiles, a
>
configuration.
Options Server
>
profile.
Options Check for
>
and Phone Phone mgmt.
>
card.
Select from the following:
PIN code request — When active, the code is requested
each time the device is switched on. Deactivating the PIN
code request may not be allowed by some SIM cards.
PIN code, PIN2 code, and Lock code — You can change
the PIN code, PIN2 code, and lock code. These codes can
only include numbers from 0 to 9. Avoid using access codes
similar to the emergency numbers to prevent accidental
dialling of the emergency number. If you forget the PIN or
PIN2 code, contact your service provider. If you forget the
lock code, contact a Nokia Care point or your service
provider.
Phone autolock period — To avoid unauthorised use,
you can set a time-out after which the device
automatically locks. A locked device cannot be used until
the correct lock code is entered. To turn off the autolock
period, select None.
Lock if SIM card changed — You can set the device to ask
for the lock code when an unknown SIM card is inserted
into your device. The device maintains a list of SIM cards
that are recognised as the owner's cards.
Remote phone locking — Enable or disable remote lock.
Closed user group — You can specify a group of people
to whom you can call and who can call you (network
service).
Confirm SIM services — You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Certificate management
Select Menu Settings
>
>
Security settings
and Phone Phone mgmt.
>
Certificate management.
>
>
127