Specifications; Charger Safety; Operation - Ryobi CHV182 User Manual

GB
FR DE ES IT
SPECIFIC SAFETY RULES
Know your power tool. Read operator's manual
■
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric
shock, fire or serious injury.
To reduce the risk of electric shock, use the vacuum
■
indoors only.
Always wear safety glasses. Everyday eyeglasses
have only impact-resistant lenses; they are NOT
safety glasses. Following this rule will reduce the risk
of serious personal injury.
Protect your lungs. Wear a face or dust mask if the
■
operation is dusty. Following this rule will reduce the
risk of serious personal injury.
Electric shock could occur if charged outdoors or on
■
wet surfaces.
Check damaged parts. Before further use of the
■
tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions
that may affect its operation.
A guard or other part that is damaged should be
properly repaired or replaced by an authorised service
centre. Following this rule will reduce the risk of
shock, fire or serious injury.
Save these instructions. Refer to them frequently
■
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them these
instructions also.

CHARGER SAFETY

Do not expose charger to wet or damp conditions.
■
Use of an attachment not recommended or sold by
■
the battery charger manufacturer may result in a risk
of fire, electric shock, or injuries to person.
To reduce risk of damage to charger body and
■
cord, pull by charger plug rather than cord when
disconnecting charger.
Make sure cord is located so that it will not be stepped
■
on, tripped over, or otherwise subjected to damage
and stress.
An extension cord should not be used unless
■
absolutely necessary. Use of improper extension
cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
a. That pins on plug of extension cord are the same
CHV182 manual (EU).indd Sec1:3 CHV182 manual (EU).indd Sec1:3
NL PT DK SE FI NO
English
RU PL CZ HU RO LV
number, size and shape as those of plug on charger.
b. That extension cord is properly wired and in good
electrical condition.
Do not operate charger with a damaged cord or
■
plug. If damaged, have it replaced immediately by a
qualified serviceman.
Do not operate charger if it has received a sharp
■
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman.
Do not disassemble charger; take it to a qualified
■
serviceman when service or repair is required.
Incorrect reassembly may result in a risk of electric
shock or fire.
To reduce risk of electric shock, unplug the charger
■
from outlet before attempting any maintenance or
cleaning. Turning off controls will not reduce this risk.
Disconnect charger from power supply when not in
■
use.
Risk of electric shock. Do not touch uninsulated
■
portion of output connector or uninsulated battery
terminal.
Save these instructions. Refer to them frequently
■
and use them to instruct others who may use this
unit. If you loan someone this unit, loan them these
instructions also.

SPECIFICATIONS

Voltage
Air flow volume
Dust storage capacity
Weight
MODEL BATTERY PACK
(not included)
CHV182 BPL-1820
BPL-1815

OPERATION

WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
3
LT EE HR SI SK GR
18 V
3
0.83 m /min
650 ml
0.91 kg
CHARGER
(not included)
BCL-1800
3/4/09 7:54:18 PM 3/4/09 7:54:18 PM
TR