Page 4
Important! It is essential that you read the instructions in this manual before mounting and operating this machine. Subject to technical modifications...
GENERAL POWER TOOL SAFETY WARNINGS under the influence of drugs, alcohol or medi- cation. A moment of inattention while operating power tools may result in serious personal injury. WARNING b. Use personal protective equipment. Always Read all safety warnings and all instructions. wear eye protection.
are caused by poorly maintained power tools. or to touch hot surfaces. Keep cutting tools sharp and clean. Properly Do not handle charger or hand vacuum with wet ■ maintained cutting tools with sharp cutting edges hands. are less likely to bind and are easier to control. Do not put any objects in ventilation openings.
SPECIFICATIONS properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. Air flow volume 0.83 m /min A guard or other part that is damaged should be Dust storage capacity 650 ml properly repaired or replaced by an authorised...
BATTERY PROTECTION FEATURES Turn off the vacuum. ■ Remove the battery pack. Ryobi 18 V lithium-ion batteries are designed with ■ features that protect the lithium-ion cells and maximize Insert the attachment into the front end of the vacuum ■...
Depress the release button located on top of the ■ hand vacuum. Pull the dust bowl down and out as shown to separate it from the motor housing. REMOVING AND CLEANING/REPLACING THE FILTER See Figure 7 Remove the battery pack from the vacuum. ■...
Page 10
Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand...