Starting An Application Using A Voice Command - Nokia iSkoot 6600 User Manual

3. Say the voice command. The phone will stop recording after approximately 5
seconds.
4. After recording, the phone plays the recorded command and the note
voice command is displayed. If you do not want to save the recording, press
Quit.
5. When the voice command has been successfully saved, the note
command saved is displayed and a beep sounds. A symbol
to the application.
Adding an application to the list
Assign voice commands to other applications that are not listed in the Voice
commands main view.
1. In the Voice commands main view, select Options→
2. Available applications are displayed. Scroll to the application that you want to
add and press Select.
3. Add a voice command to the new application.
an application', p. 124.

Starting an application using a voice command

1. In standby mode, press and hold
Speak now is displayed.
2. When you are starting an application by saying a voice command, hold the
phone at a short distance away from your mouth and say the voice command
clearly.
Copyright
See 'Adding a voice command to
. A short tone is played and the note
©
2004 Nokia. All rights reserved.
Playing
Voice
can be seen next
New application.
125