Starting An Application Using A Voice Command - Nokia 6670 - Smartphone 8 MB User Manual

80 Copyright © 2004 Nokia. All rights reserved.
To add a voice command to a profile, the Profiles folder must be opened and a specific
profile selected.
2 The text Press 'Start', then speak after tone
• Press Start to record a voice command. The phone sounds a starting tone and the
note Speak now is displayed.
3 Pronounce the voice command. The phone will stop recording after approximately 5
seconds.
4 After recording, the phone plays the recorded command and the note
command is displayed. If you do not want to save the recording, press Quit.
5 When the voice command has been successfully saved, the note
is displayed and a beep sounds. A symbol
Adding an application to the list
Assign voice commands to other applications that are not listed in the Voice commands
main view.
1 In the Voice commands main view, select Options→
2 Available applications are displayed. Scroll to the application that you want to add and
press Select.
3 Add a voice command to the new application.
application" on page 79.

Starting an application using a voice command

1 In standby mode, press and hold
is displayed.
2 When you are starting an application by saying a voice command, hold the phone at a
short distance away from your mouth and pronounce the voice command clearly.
3 The phone plays the original voice command and starts the application. If the phone
plays the wrong voice command, press Retry.
is displayed.
Voice command saved
can be seen next to the application.
New application.
See "Adding a voice command to an
. A short tone is played and the note
Playing voice
Speak now